Manual and programmable robotic arm with fancy control panel.

Switches as bits, a 4051 daisy chain as bytes, and a small 8-byte ROM for Arduino is made! A tribute to AGC's core rope memory of 1960s!

An Arduino NTSC/PAL video display shield with integrated framebuffer and composite video output.

An IoT wearable technology to haptically guide users with visual impairments/obstructions while monitoring their environment.

Grab a couple of motors, a servo and build a cannon!

For all of the advanced software and multitude of sensors why is it that this expensive little robot still gets stuck under beds?

Navibot is a guidance system that helps visitors or patients navigate their way in any new building.

Control an MAX7219 with an HC-06 Bluetooth module and your mobile phone.

It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.

Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.

Arduino automatic multiple light control system. Room light on, table lamp off. Room light off, table lamp on via gesture.

Make a simple and programmable servo arm out of readily available materials!

Magnetic Levitation, need I say more? Levitate some small magnets with a bigger electromagnet!

This video will illustrate the working principle of the Water Quality Monitoring and Notification System.

Arduino & Rapberry Pi based chess computer that uses Stockfish ,recognises piece positions using reed switches and signals its move

MeArm mounted on smart robot car controlled by 2 Arduino UNOs

Arduino Safe - 6 digit Passcode

Long-range wireless sensor based on Whisper Node capable of running for over a year on a single CR2032, transmitting data every 60 seconds.

Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.

Weigh objects, and make decisions based on weight.

An Arduino Uno-based alarm with motion sensor, three LED outputs and a keypad with password input.

Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.

This is one of my personal budget/project made for University to graduate. This Airplane (UAV) is made fully homemade using only Arduino.

If you can't find a voltmeter at home or anywhere else, then this hack is for you!