Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Project tutorial by wahltharvey
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
Athlete training device helps to enhance the response speed of players through optical stimulation.
Project tutorial by Team Science Camp
In this article, we're going to build a controller that you can use on Steam!
Project tutorial by Ingeimaks Ingeimaks
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
Transfer images over Bluetooth between an Arduino and an Android phone.
Project tutorial by Alf81010
A simple candy dispenser to enjoy upon your request, as well as to practice Arduino and building skills!
Project tutorial by Hada Amira
You can make FRIDAY, that can make calls, tell you the temperature, turn things on or off and even take pictures.
Project tutorial by Oguz Salar
One port to role them all.
by Tal O
A small game in which the player must match the sequence to earn points. The game ends when the time runs out.
Project showcase by Reid Paulhus
Clock LCD display adjustable.
Project tutorial by Tittiamo
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Create a digital watch for Arduino combined with a 16x2 LCD Keypad Shield and using YAKINDU Statechart Tools.
Project tutorial by Robin Herrmann
This is a very simple way to control a 3-phase AC installation in a delta configuration.
Project in progress by philippedc
Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!
Project simulator control and display encoder motor.
This 12 pushbutton piano plays the 4th octave with an optional added 3rd and 5th octave, controls note length and pitch with two pots.
Project in progress by fr_pal
A Monster in a Box Halloween prop is a box or crate that appears to be jailing a monster which is on the verge of escaping.
Project tutorial by craig jameson
Using a 3D magnetic sensor and an electromagnet, this project enables you to transfer data via magnetic fields.
Project tutorial by Tomi Chen
Mini-thermostat with input for a 2-wire NTC thermistor and output for a resistive heating element. Plus code & schematics.
Project showcase by salhar1
Never forget to water your plants or turn off your grow lights. Never over or under water plants with water pump control and drip system.
Project in progress by londonium2021
How alert and happy Cecile (with Alzheimer's) became when she heard familiar songs! Lift the book, turn the page--the book does the rest.
Project tutorial by Mike Rigsby
Based on Blockly and BlocklyDuino, here's a multilingual enhanced version with supervision, upload, multi-level blocks, etc.
Project tutorial by LibrEduc
Or connect with your social account:
New here? Create an account