This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.

Fully autonomous rocket!

How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.

An Alexa enabled door lock with face recognition and remote control.

Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.

The hybrid rocket Chimera is a project of the Loughborough Space Society. This hackster. io project shows insights into the electronics team.

Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).

This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.

An update of the older version of the keyboard. Now it doesn't require switches on your breadboard, you can use your pc keyboard.

As a musician and music passionate, this little Keyboard is my first (but not last) Arduino project. Hope you have fun with it :)

A pantry which can automatically replenish kitchen items.

I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.

Smart dustbin using ultrasonic sensor for garbage level detection

The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.

Never forget to water your plants or turn off your grow lights. Never over or under water plants with water pump control and drip system.

Real-time visibility and control of water, process farming, weather & wells - from anywhere.

An up to six digit number code that enables you to unlock a secret container.

Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.

An Arduino powered internet connected weather station sending data to weather underground for storage and viewing.

This is a musical Tesla Coil driven by an Arduino and Slayer-Exciter. Using an Arduino, you can play music with pure electricity!

This project focused on the calculation of machine efficiency along with various parameters visualized on IBM Watson IoT platform.

A 3D-printed snowflake made with Arduino Uno. Has 91 addressable RGB LEDs.