In this project, we'll combine a gyroscope and NeoPixels to build a device that lights LEDs corresponding to the angle of inclination.
Project tutorial by danionescu
A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.
Project tutorial by StaffanEk
This device will allow you to open your door by asking Alexa to open it for you.
Project tutorial by Keith Caskey
Custom electronic cigarette for chasing cloud.
Project tutorial by Shahariar
This interesting project will cover all things required for the ultimate goal of building a mobile remote surveillance camera.
Windows 10 IoT Core project to control pool components for example pool pump, waterfall and solar heater.
Project tutorial by Mike Mackes
Make a program for the Arduino Pro Mini in Visual Studio to control motor speed with PID which can archive it exactly.
Project tutorial by whitebank
I made a eye-ball using LED Tape Neopixel. It blink and pupil is moved to the left and right.
Project tutorial by HomeMadeGarbage
An innovative wearable technology for visually impaired peoples.
Project tutorial by Muhammed Azhar
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
Project tutorial by Martedi
An Arduino powered floppy disk controller and reader/writer for making and writing disk images from and to old AmigaDOS floppy disks.
Project tutorial by RobSmithDev
A romantic project for Valentine's Day - a 3D printed sunflower that opens and closes in reaction to light. Have a Sunny Valentine!
Project tutorial by circuito.io team
If there’s one thing that we geeks love, it’s coffee.
Arduino powered control and measurement platform.
Project tutorial by Chip McClelland
Visual aid to parking in a two-car garage
How to make Pixie, a wristwatch that combines both analog and digital clock technology, with the precision of an atomic clock.
Project tutorial by Konstantin Dimitrov
A water bottle that can keep track of your water intake and reminds you to drink enough water.
Project tutorial by Md. Khairul Alam
Replicate the 1976 KIM-1 computer on an Arduino. Pocket-sized 6502 coding! Use serial port, or add small PCB to make a stand-alone device.
Project tutorial by Oscar Vermeulen
Use a 3D printed encoder wheel, LED, and 2 photocells to demonstrate how a quadrature encoder works.
Project tutorial by Shawn hymel
These Smart Blinds automatically open and close according to ambient light levels, and also close in response to heat.
Project tutorial by Froz3nArcher
Move your drone racing skills to the next level with these interactive air gates!
Or connect with your social account:
New here? Create an account