An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
Project showcase by FrancoMolina
An alarm clock with no physical buttons, just a remote control.
Project showcase by Robin The Tactician
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)
Project showcase by Billy King
A ritual instrument of dying that can be played with when I no longer have any strength to use any other instrument. Until the last breath.
Project showcase by
A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.
Project showcase by Nick Romeo
Bluetooth and Android-based call indicator with panic switch for calling a preset number.
Randomly select a destination for one wagon on a Timesaver layout or randomly select order of wagons for an Inglenook layout.
This project involves extracting an EMG signal from two muscles of right hand and controlling a robotic arm based on the hand movements.
Project showcase by Shivanshu Pandey
Unlock an inconspicuous chest from across the room with a secret switch!
Project showcase by Michael Guerero
Replacing the old and expensive mechanical system with the much reliable and cheap electrical system using Arduino!
Project showcase by PuranSingh and PiaraSingh
Chess processor with GUI dedicated for Arduino Mega.
Project showcase by Sergey_Urusov
How to make a remote-controlled origami robot with Arduino.
My kids love balloons, and they know that daddy is almighty. :)
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
Slider for medium camera, with programmable speed and paths.
Project showcase by Guiye Perez Bongiovanni
Pulse induction metal detector, built on the Arduino Nano.
This project aims to provide insight into the workings of a digital oscilloscope. This project is designed to be an education tool.
Project showcase by wayri
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
Bongo Hero is inspired by Guitar Hero. You must tap bongos at the right time. Color changes and speed increases as you level up.
Project showcase by Etienne Daspe
WS2812 LEDs in drums!
Project showcase by bdorer
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Teach ALL kids the fundamentals of AI and machine learning, through games and hardware and software design.
Project showcase by Fryden-Learning
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Or connect with your social account:
New here? Create an account