We are showing voice control home automation system to control appliances with own voice command an Android app IoTBoys.
An in-depth exploration of controlling your Arduino with a button!
by Alex Glow
Arduino Project: How to make a Fidget Spinner RPM counter with Hall-effect sensor.
by Andriy Baranov
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
You’ll learn how to use the KY-037 sound detection sensor with Arduino. You can measure changes in the intensity of sound in an environment.
Interface a 16x2 Liquid Crystal Display with Arduino Uno. Here we just use 4 wires.
by Akshay Joseph
Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!
by Doctor Volt
Hey Readers today I’m back with one of the most interesting project which was never created by anyone before,
Developing an automatic chessboard. Our main goal is to recover the experience and unmatched feeling of playing OTB.
by Carlos Lopez Pendas
A medicine vending machine to store and give doses via medicine bottles and alert patients at prescribed times.
This article explains how to interface a Bluetooth module with HC-05 with Arduino Uno.
This tutorial will illustrate the working of an RFID reader.
by Aritro Mukherjee
The E18-D80NK is an advanced low-cost IR Proximity Sensor with an obstacle detection range of 3 cm to 80 cm.
Alarm Clock with Arduino.
Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.
This project will guide you to set up an alarm system using a motion detector.
Connect your microcontroller to the internet by adding ESP8266 WiFi module!
Want to display text? Here is your component!
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
A basic introduction to the low cost and accurate HC-SR04!
This project will show you how to use an RGB LED.
Control and maintain stable relative humidity and temperature states to simulate natural conditions for experimental testing in the lab.
Record and play back a few seconds of input stored in EEPROM.
Or connect with your social account:
New here? Create an account