A simple, small piano that is not only small as the name implies, but it runs off of the Arduino Nano Every.
by Christian Madlansacay
Use a ratiometric linear Hall effect sensor to build simple magnetic field strength meter.
Project tutorial by Mirko Pavleski
Easily display custom animated glyphs on 16x2 LCD using the createChar() function from the LiquidCrystal library.
Project tutorial by tusindfryd
This is a simple square-wave generator that basically uses the TimerOne library allow you to generate a PWM signal at pin 9.
An accurate clock with date displayed on a 16x2 LCD using just the Arduino, the display and few buttons. No RTC module required.
Project tutorial by paulsb
You'll learn how to create an automation system to communicate 3 Arduinos via RS485.
Project tutorial by Moreira
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
A TensorFlow Lite Micro Speech model that detects wake words and turns on a different coloured LED light to emulate traffic lights.
Project tutorial by Mandy Wong
In this project, I will show you how to make a Tic Tac Toe with a TFT Touchscreen.
Project tutorial by MisterBotBreak
Mastering the short comings of simple button switches. The fundamentals everyone should know.
Not enough fingers to play clarinet? With this project you can delegate solenoids to push two side-keys. Awkward fingerings whaaat?
Project tutorial by touchmysound
Automatically turns on and off your solder fan when you remove your iron from the holder.
Project tutorial by kzim94
3-channel voltmeter with the ability to measure both negative & positive voltages on the same circuit or 3 different circuits simultaneously
Project tutorial by Shahariar
There are numerous examples of how to connect button switches via an external interrupt. This example offers an alternative approach.
Project tutorial by ronbentley1
It is never easy to keep a baby busy and safe without you looking all the time.
Project tutorial by Thomas sxt
In this project it is presented 1-dimensional version of the classic game ‘Pong’ made with NeoPixel LED strip.
An Arduino based Christmas tree decoration using basic electronic components and recyclable material.
Project tutorial by Salwa El Kaddaoui
Create an inline MIDI recording with an Arduino, an SD card module, and never lose your musical noodling ever again!
Project tutorial by pomax
A stereo VU meter built with an Arduino Nano and two NeoPixel LED rings.
Project showcase by ericBcreator
Start coding online with the Arduino Web Editor, save your sketches in the cloud, and always have the most up-to-date version of the IDE!
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
Convert a Kawai F-30 or similar to a fully configurable triple continuous USB standalone pedal. No soldering, seamless and reversible!
In this project, I have shown how to interface a GPS module with Arduino UNO. The data for longitude and latitude is displayed on the LCD.
Project tutorial by Ruchir Sharma
Turn an LED on and off using Windows Remote Arduino.
Project tutorial by Windows IoT
Or connect with your social account:
New here? Create an account