Aquarium light that mixes UV and White LED lighting, for enhanced beauty at all light levels, with twilight, sunrise and sunset effects.
Project showcase by randtekk
Just like the full size houses, only smaller! Has 31 EL wires and LEDs synced to music using an Arduino and Vixenlights.
Project showcase by robowarner
A 5-axis robot, all 3D-printed, with an Arduino Nano and miniSD card. Path programming and control by IR remote.
Project showcase by Kjell Jaeger
Take a chance against up to two others! Roll and then move along the board, gaining points from mini games by using a phone.
Project tutorial by Arduino “having11” Guy
MCP9808 is a highly accurate digital temperature sensor ±0.5°C I2C mini module.
by Dcube Tech Ventures
A sundial type clock with stepper motors and lasers to show hour and minute.
Project in progress by Mr_Xu
A Home System To Moniter Fire, Smoke/Gas Leak, Laser Theft Trip and Building Collaspe.
Project tutorial by AmanKazi
BMA250 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g.
This code is bit more advanced, but make fake candle more realistick.
Project in progress by maxim2511
Unusual clock consisting of a strip of 60 WS2812 LEDs, which uses "infinity mirror" effect.
Project tutorial by Mirko Pavleski
Set an alarm with MKR1000 and MKR Relay Proto Shield to turn a lamp on/off.
Project tutorial by David Escobar
Build an unlock alert system for your bike using a GSM module.
Project tutorial by msr048
BMG160 is basically a 16-bit, digital, tri-axial, gyroscope sensor which can measure angular rates.
An Arduino and Bluetooth-based Hot Wheels finish line timer to record cars' speed and determine the winner of each heat.
Project in progress by Unexpected Maker
Monitors if our barbecue grill is on, displays the grill temperature, and checks if it's okay to leave the deck-door open.
Project in progress by Tom Lewis
SHT25 I2C Humidity and Temperature Sensor ±1.8%RH ±0.2°C I2C Mini Module.
This project will show you how to make a DIY Intrusion Detection System.
Project tutorial by STEMpedia
Open-source design for a "Génies en Herbe" / "Reach for the Top" quiz machine (can't afford the machines that are for sale on the Internet).
Project in progress by vinfort
Arduino driver for 8x8 LED Modules controlled via MAX722xx.
Project tutorial by miklas
Recreating old mosaic technique with lasers.
Project showcase by Team VOLNA
Capacitive Board (CapBoard) is a device based on Arduino Nano for turning conductive objects into a capacitive sensor to detect the touch.
Controlling office desk lamp with Amazon Alexa and more...
Project tutorial by Pop Gheorghe
LOccam is a light implementation of OCCAM intended for Arduino. It is ideally suited for multitasking, especially for beginners.
Project showcase by 8반_3조
Or connect with your social account:
New here? Create an account