A modular 3D printed throttle quadrant and trim wheel for use with flight simulators.
Project tutorial by markbennettuk
i'm making a simple after burner effect for rc plane motorized with electric ducted fan (EDF) with arduino and leds strip
Project tutorial by yvesmorele
A new customizable TVC mount that can stabilize your model rocket!
Project in progress by Cole Purtzer
Measure the thrust of a model rocket motor with an Arduino!
Project tutorial by nmrsthrust
I just levitated small objects using ultrasonic waves
Project tutorial by edison science corner
Add more fun to bottle rockets!
Project in progress by mbagrianski
If you want to set up your airplane accordingly to the designer's specification, you need to measure the control surface right angles.
Project tutorial by diegorobledo
A Thrust Vector Controlled rocket that can maintain its orientation without the use of fins.
Project showcase by Cole Purtzer
Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!
Project tutorial by alex_chang
A small rocket test vehicle that launches without the use of fins!
This will keep your rocket upright and on course!
As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
Project tutorial by marcozonca
In a previous project I developed a GPS data logger for RC aircraft but I did not have feedback on the receiver. So I modified the prototype
Project in progress by yvesmorele
To add the feature of Direction Control using the initial direction as a reference and applying a proportional controller.
Project tutorial by harsh dokania
I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.
This will keep your rocket upright and on course.
My variant of converting a four-channel USB flight simulator into an RC transmitter using Arduino.
Project showcase by tsar_
Fully autonomous rocket!
The hybrid rocket Chimera is a project of the Loughborough Space Society. This hackster. io project shows insights into the electronics team.
Project in progress by Chrisy | Variint
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
A efficient rocket motor for high and low powered rocketry.
The will gimbal a rocket motor back and forth to keep you rocket upright.
This will keep your rocket going straight without fins!
This rocket engine was designed with the priority to go to space!!!!
Or connect with your social account:
New here? Create an account