CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.
Project tutorial by Andrei Florian
How to make a DIY Rocket Launcher using Arduino - Design the circuit, make a rocket ignitor and control the launcher from your phone.
Project tutorial by Jithin Sanal
A modular 3D printed throttle quadrant and trim wheel for use with flight simulators.
Project tutorial by markbennettuk
i'm making a simple after burner effect for rc plane motorized with electric ducted fan (EDF) with arduino and leds strip
Project tutorial by yvesmorele
Measure the thrust of a model rocket motor with an Arduino!
Project tutorial by nmrsthrust
I just levitated small objects using ultrasonic waves
Project tutorial by edison science corner
If you want to set up your airplane accordingly to the designer's specification, you need to measure the control surface right angles.
Project tutorial by diegorobledo
Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!
Project tutorial by alex_chang
As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
Project tutorial by marcozonca
To add the feature of Direction Control using the initial direction as a reference and applying a proportional controller.
Project tutorial by harsh dokania
I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
This is the simplest example of repulsive magnetic levitation.
Project tutorial by Mirko Pavleski
Ever wanted to use a newer GoPro camera on your 3DR Solo? Here is how you can connect and control the latest GoPro 5/6/7 camera models.
Project tutorial by Stephan
I wanted an additional analog control in FlightGear - nice, cheap and compact.
Project tutorial by dancili
It's not only a quadcopter... it's an open source machine!
Project tutorial by RoboCircuits
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Project tutorial by WesleyCMD
How to hack a Syma S107G toy helicopter and control it via infrared using Arduino.
Project tutorial by infusion
Learn how to use a Lidar sensor and an Arduino to build a configurable forward-facing obstacle detection solution for your 3DR Solo.
It's a simple project that can hover on a cushion of air. It runs by the 1sheeld+ app. Using the Slider, GamePad and Terminal Shield.
Project tutorial by K084
Navigational Tracking Device to keep an eye on altitude of Hot Air Balloon or Weather Balloon Satellite.
Project tutorial by Patel Darshil
A drone project that uses the Neural Pattern Recognition Module and other aspects of the Curie Module to advantage for creating a cool drone
Project tutorial by Tom Minnich
The project consists of a kit for drones that includes an electronic device that functions as a meteorological station.
Project tutorial by Giuseppe Caccavale
Snap Circuits® makes learning electronics easy and fun! These projects are designed for younger kids who want to be introduced to IoT.
Project tutorial by Daniel Porrey
Or connect with your social account:
New here? Create an account