Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.

Detect flight data of a drone, like altitude, speed, GPS position and many other. Besides, we can take incredible aerial pictures!

Learn how to make a cheap RC Plane 4 Channel Transmitter – Receiver Using Arduino.

A drone project that uses the Neural Pattern Recognition Module and other aspects of the Curie Module to advantage for creating a cool drone

The project consists of a kit for drones that includes an electronic device that functions as a meteorological station.

How to hack a Syma S107G toy helicopter and control it via infrared using Arduino.

My variant of converting a four-channel USB flight simulator into an RC transmitter using Arduino.

I tried to make an Arduino helicopter which can be controlled via smartphone with Bluetooth.

Fully autonomous rocket!

I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.

A successful attempt at making a fully functional Telemetry CanSat using 1Sheeld.

This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.

An Arduino-based radio interface for older radios including ARINC 410

I just levitated small objects using ultrasonic waves

This launch pad helps your rocket go high and far!

As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.

This system can do a number of things for your rocket!

I wanted an additional analog control in FlightGear - nice, cheap and compact.

In a previous project I developed a GPS data logger for RC aircraft but I did not have feedback on the receiver. So I modified the prototype

Navigational Tracking Device to keep an eye on altitude of Hot Air Balloon or Weather Balloon Satellite.

How to make a DIY Rocket Launcher using Arduino - Design the circuit, make a rocket ignitor and control the launcher from your phone.

It's a simple project that can hover on a cushion of air. It runs by the 1sheeld+ app. Using the Slider, GamePad and Terminal Shield.

To add the feature of Direction Control using the initial direction as a reference and applying a proportional controller.

Measure the thrust of a model rocket motor with an Arduino!