Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Project tutorial by WesleyCMD
Detect flight data of a drone, like altitude, speed, GPS position and many other. Besides, we can take incredible aerial pictures!
Project tutorial by OMEGA D2
The project consists of a kit for drones that includes an electronic device that functions as a meteorological station.
Project tutorial by Giuseppe Caccavale
A drone project that uses the Neural Pattern Recognition Module and other aspects of the Curie Module to advantage for creating a cool drone
Project tutorial by Tom Minnich
Drones are fun to fly, and it’s possible to do limited flying using brainwaves.
Project tutorial by Tony
I just levitated small objects using ultrasonic waves
Project tutorial by edison science corner
I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.
Project tutorial by harsh dokania
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
Project tutorial by yvesmorele
A successful attempt at making a fully functional Telemetry CanSat using 1Sheeld.
Project tutorial by Fatima Fouda
How to hack a Syma S107G toy helicopter and control it via infrared using Arduino.
Project tutorial by infusion
How to make a DIY Rocket Launcher using Arduino - Design the circuit, make a rocket ignitor and control the launcher from your phone.
Project tutorial by Jithin Sanal
Navigational Tracking Device to keep an eye on altitude of Hot Air Balloon or Weather Balloon Satellite.
Project tutorial by Patel Darshil
Measure the thrust of a model rocket motor with an Arduino!
Project tutorial by nmrsthrust
As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
Project tutorial by marcozonca
I wanted an additional analog control in FlightGear - nice, cheap and compact.
Project tutorial by dancili
It's a simple project that can hover on a cushion of air. It runs by the 1sheeld+ app. Using the Slider, GamePad and Terminal Shield.
Project tutorial by K084
To add the feature of Direction Control using the initial direction as a reference and applying a proportional controller.
Or connect with your social account:
New here? Create an account