Drones are fun to fly, and it’s possible to do limited flying using brainwaves.
Project tutorial by Tony
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
Project tutorial by yvesmorele
Add more fun to bottle rockets!
Project in progress by mbagrianski
A modular 3D printed throttle quadrant and trim wheel for use with flight simulators.
Project tutorial by markbennettuk
Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!
Project tutorial by alex_chang
As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
Project tutorial by marcozonca
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
Project in progress by suhaskd
CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.
Project tutorial by Andrei Florian
A efficient rocket motor for high and low powered rocketry.
Project in progress by Cole Purtzer
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by alirezasafdari and syamil_zaini
In a previous project I developed a GPS data logger for RC aircraft but I did not have feedback on the receiver. So I modified the prototype
Project in progress by yvesmorele
This is one of my personal budget/project made for University
to graduate. This Airplane (UAV) is made fully homemade using only
Project showcase by Gorceag Victor
It's not only a quadcopter... it's an open source machine!
Project tutorial by RoboCircuits
How to make a DIY Rocket Launcher using Arduino - Design the circuit, make a rocket ignitor and control the launcher from your phone.
Project tutorial by Jithin Sanal
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Project tutorial by WesleyCMD
The will gimbal a rocket motor back and forth to keep you rocket upright.
This will keep your rocket upright and on course!
A new customizable TVC mount that can stabilize your model rocket!
I just levitated small objects using ultrasonic waves
Project tutorial by edison science corner
Failed but still teaches a lot.
This rocket engine was designed with the priority to go to space!!!!
A small rocket test vehicle that launches without the use of fins!
A Thrust Vector Controlled rocket that can maintain its orientation without the use of fins.
Project showcase by Cole Purtzer
A model rocket that guides itself autonomously.
Or connect with your social account:
New here? Create an account