You will be able to create a small aquarium assistant which will switch on/off the light and control water parameters automatically.
Project tutorial by Boisse Martin
Learn how to make a device to limit your shower time!
Project tutorial by Ryan Chan
The Kickstarter may have failed but that doesn't mean you can't make your own Fridgeye with a few components and a Nextion display.
Project tutorial by Kevin Sidwar
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
Project showcase by hagakure
How to make a good-looking touchscreen thermostat with optional Modbus support via RS485 with ArduiTouch MKR.
Project tutorial by hwhardsoft
Create a locking system that locks your room with your fingerprint and an access code on the cheap.
Project tutorial by Srivishnu Piratla
Do you want a more fun way to open your garage door than pressing a button or remembering a pass-code? Try a fingerprint scanner!
Project in progress by Team John Brown University Embedded Systems - Joe & Alex
Allows precise control of the throttle speed and the ability to run pre-programmed trolling routines.
Project tutorial by Terry Towle
Control temperature for up to 8 separate processes! Cooling/heating control with humidity sensing. Based on Arduino and DS18B20/DHT22.
Project in progress by Leo
A touchscreen in the wall that allows you to control each and every LED light in your ceiling independently and phone controllable!
Project in progress by Joey Pongallo
2 wire 8 channel Relay Module || Reduce your CPU workload by interface 74LS164N.
Project showcase by Boaz Lawnce
An Arduino-controlled lamp that turns on automatically when it gets dark. Turn it off or back on with the swipe of your hand!
Project tutorial by Arduino “having11” Guy
In this project, I've interfaced RFID-RC522 with Arduino and then sent RFID data to phpMyAdmin database using Python.
Project tutorial by Embedotronics Technologies
Create massive train traffic on your own model railway!
Project showcase by Steve Massikker
Replace an unreliable cheap pressure switch with an Arduino-controlled high current relay. Ver 2 now includes an auto drain valve.
Project in progress by RedTar4
You should never leave your 3D printer unattended... but you do. This device will cut power to your printer when it senses thermal runaway.
Project tutorial by ArtSuzhou
On this Part 2, we will implement an IoT approach were control will be also possible remotely via Internet.
Project tutorial by MJRoBot
This project uses Arduino, Raspberry and Attiny, it allows you to control and monitor your home.
Project showcase by Thibault
There are two sensors as detectors in this project, namely rain sensor and LDR. Rain sensor functions to detect the occurrence of rain/not.
by Susi_Susanti and Binti_mufarida
Automatically switches on/off a battery charger.
Project showcase by John Wood
Control of the HVAC of a car (or other vehicle) via Nextion touch and Arduino UNO.
Project showcase by hwhardsoft
An up to six digit number code that enables you to unlock a secret container.
Project in progress by 3 developers
A volume control for the TV/receiver using Arduino Nano.
3D-printed enclosure makes it look lite Amazon Dot.
Project tutorial by Sam
Valve automatically closes after user-defined time
Project showcase by Muhammed Jaseel
Or connect with your social account:
New here? Create an account