How to measure the instantaneous power absorbed by the electrical system and send it to a display & sound a buzzer if max power is reached.
Project tutorial by Giuseppe Torino
This system is to get 100% sun energy. In this system solar panel will move in the direction of sun from sun rise to sun set.
Project tutorial by Mayur_r
In this project I am going guide you through how to make a bulb or any appliance controlled by a TV remote, and show how to get hex codes.
Project tutorial by muhammed shameel k.v
A capacative touch sensor allows text message feedback when an intruder enters the room as well as turning on the lights and fan.
Project in progress by Randa El Ali and Jesse Laprad
Use a smart battery charger on up to 6 batteries - wave your hand to turn display on and check charging.
Project tutorial by leonzak
How to make a lamp controlled by TV remote control.
Project tutorial by Kutluhan Aktar
This project teaches how create a domotics lamp with your Arduino.
Project tutorial by GiorgioTraverso
Arduino based foot operated reconfigurable macro keypad.
Project showcase by Team Fidgety Fred
Includes pedestrian detection/crossing and uses an Arduino Nano, LEDs and pingers and a FSM code.
Project showcase by Daniel Turner and Carlos Silva
Automatic Cable Modem Rebooter.
Project tutorial by Eduardo Zola
A voice-controlled project using the EasyVR Shield with an Arduino Uno and gen4-uLCD-43DT.
Project tutorial by 4 Makers
Simple SLR intervalometer, for shooting hyperlapse and time-lapse photography using an Arduino Nano.
Project showcase by Scott Bradley
Control JMoon MakerSpace entrance and lights with 1Sheeld.
Project tutorial by Jasmeet Singh
Simply this project is a DIY safe using Arduino & 1Sheeld. I can Open the safe if I entered a specific pattern using pattern shield.
Project showcase by Mahmoud Ahmed
Wireless voice controlled garage door opener and animated turn signals.
Project tutorial by Sahil Parikh
Simple device that I designed for automatic control of additional LED lighting in the kitchen.
Project tutorial by Vadim
This project is to create a smart lock door system with voice activation to open and close the door via voice sensor and Arduino Uno.
Project showcase by bangkitwahyu
Control your home devices using some button on the GLCD and using Voice Recognition
Project in progress by Mahmoud Osman
When motion is sensed, an SMS will be sent to say that motion was detected.
Project tutorial by Christiaan Neil Burger
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max.
Project in progress by philippedc
Make a simple device that actually lets you speak to your TV.
Project tutorial by Arun
A low-cost way of controlling a model train layout using a mobile phone through DTMF.
Project tutorial by Kushagra Keshari
Do not worry about finding a remote that does not know where you are at home. This project allows you to tune your TV with your smartphone.
Project tutorial by Makewith
Alexa controlled timers at a glimpse. A really fancy egg-timer with added temperature control.
Project tutorial by Team 2dudes
Or connect with your social account:
New here? Create an account