Automated Home using Raspberry Pi 2 (Windows 10 IoT Core) and Arduino.

A Home Automation system using a Raspberry Pi 2 and Windows 10 IoT Core including an App.

IoT Enabled Hydroponic Farm

Log humidity, automatic irrigate, switch plant growing lamp on and voice control everything with Amazon Alexa and Arduino.

Smart home system using MediaTek Linkit, Xbee, Arduino, Orange PI and Azure

Create a simple home automation system using Arduino and an Android phone.

Another indoor greenhouse powered by Nano. 100% controlled environment with some extra perks that make life easier.

WaterPi tracks critical metrics about the houseplant, visualizing those metrics with charts, and waters the plant remotely.

How to make a connection between an internet service and Arduino boards.

Control your home from any place in the world using a website.

Secure your house by implementing this handy automatic door management system.

Create an awesome looking motion activated RGB lights for any staircase under $20!

Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.

Use your Smartphone to turn power on/off.

Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)

Create a Vending Machine, powered by Arduino microcontroller, using "any cheap and easy to get" components available in local store.

An Arduino UNO-based classic kitchen timer with LCD display and buzzer

This project demonstrates the use of different technologies and their integration to build an intelligent system for home automation.

How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.

Keep your plants watered even when you forget or go on vacation with this automatic watering system.

Get your essential appliances off the grid with just one solar panel

Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.

Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.

Opening 26 pieces of windows at the same time in a 2,000-square-meter greenhouse under just 20 seconds? Yes!