Automated Home using Raspberry Pi 2 (Windows 10 IoT Core) and Arduino.

A Home Automation system using a Raspberry Pi 2 and Windows 10 IoT Core including an App.

IoT Enabled Hydroponic Farm

Log humidity, automatic irrigate, switch plant growing lamp on and voice control everything with Amazon Alexa and Arduino.

Smart home system using MediaTek Linkit, Xbee, Arduino, Orange PI and Azure

Another indoor greenhouse powered by Nano. 100% controlled environment with some extra perks that make life easier.

Create a simple home automation system using Arduino and an Android phone.

How to make a connection between an internet service and Arduino boards.

WaterPi tracks critical metrics about the houseplant, visualizing those metrics with charts, and waters the plant remotely.

Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.

Secure your house by implementing this handy automatic door management system.

Create an awesome looking motion activated RGB lights for any staircase under $20!

Control your home from any place in the world using a website.

Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)

Use your Smartphone to turn power on/off.

Create a Vending Machine, powered by Arduino microcontroller, using "any cheap and easy to get" components available in local store.

How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.

This project demonstrates the integration to build an intelligent system to control home appliances for elderly

An Arduino UNO-based classic kitchen timer with LCD display and buzzer

Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.

Keep your plants watered even when you forget or go on vacation with this automatic watering system.

Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.

Record and play back a few seconds of input stored in EEPROM.

Water your garden with up to three sprinklers directly from your water tap.