A very simple project for counting cars coming in and out of a parking lot using Arduino, Processing and PHP.
Project tutorial by Team UNO
This can hep you to access your home when you are out . You can switch on and off the home appliances from anywhere.
Project tutorial by Team Brink.IO
Automatically turn on the humidifier when the environment humidity is below 50%.
Project showcase by chenwei19940207
The Universal Infrared (IR) Remote Controller can control any appliance that uses IR communication for remote operation.
Project tutorial by 4D Makers
Sweeping frequency magnetic hard water conditioner
Project tutorial by moty
No more hassles of unlocking your computer. Unlock your Windows PC with just a flick of an RFID card/tag.
Project tutorial by Prasanth K S
Why spend seconds giving away promotional buttons at Maker Faires, when you can spend countless hours building a machine to do it for you?
Project tutorial by Jeremy S. Cook
Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.
by Muhammad Aqib
A simple RFID controlled relay module to turn your PC on/off.
Project tutorial by Heathen_Hacks-v2
The sequel to Part 1 of the same video title.
A simple thing that lets you monitor your dog's water intake and reminds you to refill it.
Project tutorial by HeathenHacks
DIY Arduino pellet burner by converting an old wood boiler.
Project showcase by Team Federico Aschero
Create a simple home automation system using Arduino and an Android phone.
Project showcase by Davide Vertuani
Water your garden with up to three sprinklers directly from your water tap.
Project tutorial by PRosenb
An electric furnace-air handler, arduino-based, controller.
Project showcase by desbiensl
Just a simple Arduino-based RFID system to control stepper motor in a prototype circuit.
Project tutorial by KABAKA
An Arduino Uno-based alarm with motion sensor, three LED outputs and a keypad with password input.
Project showcase by thehack904
When the door is opened, Arduino sends a notification via Gmail. Magnetic Sensor is used to detect the door open. It can be used with IPv6.
Project tutorial by phpoc_man
Automatic garage doors are a blessing. However.. Did you push the button when leaving Or worse... Did the kids close the door when leaving
Project showcase by victormarinus
Project that integrates Arduino, RTC display with I2C, RFID reader and SD card module.
Project in progress by Gedeane Kenshima
An Arduino UNO-based classic kitchen timer with LCD display and buzzer
Project tutorial by I and myself
A system that tells you about the parking slots of an area.
Project showcase by Kaustubh Agarwal
Taking an Arduino Uno, one display, one Hall sensor and four magnets, i measured how many meters run my little hamster named "Ciambella."
Project tutorial by Franzduino
How to control several roller shutters with inexpensive relay boards (not ruining them) with physical buttons and remotely simultaneously.
Project tutorial by gomecin
Or connect with your social account:
New here? Create an account