After many failed attempts to connect BLE in Windows 10 and Linux, I decided to create a small app for Android.
Project showcase by Gustavo Reynaga
The climate change is upon us! We badly need an environmental monitoring system deployable in seconds.
Project in progress by giovambattista vieri
A pen holder that determines when there are two or less pens and triggers an Amazon pen set replacement.
Project tutorial by Alex Merchen
We'll show you how you can post a Facebook status update from your Arduino Yún.
A quick intro into to the IoT JumpWay. A Intel® Arduino 101 IoT Dev Kit LED example with IoT communication via the IoT JumpWay MQTT Library.
by Adam Milton-Barker
Board for sensing voltage /current air temperature and motion via I2C and being sent to Librato for monitoring.
Project tutorial by Jade Perreault
Control your IoT devices with Arduino 101, DFRobot LCD Keypad Shield and autonomous IoT communication via the IoT JumpWay.
A simple IoT experiment, using an Arduino MKR1000 board to monitor a potentiometer and DHT11 sensor via Favoriot IoT platform.
Project tutorial by Lintang Wisesa
Wever is a smart IoT device, which automatically controls the water pump according to the requirement and sends update to internet.
Project in progress by Kaushal Wagle
Here we'll show you how to pass short messages and commands to your Arduino Yún via Amazon SQS, a simple cloud-based message queue service.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Thinger.io.
We'll show you how to get your Arduino Yún to check for EPA-regulated facilities in the Toxics Release Inventory (TRI). You'll be able to...
Project tutorial by Temboo_OFFICIAL
Or connect with your social account:
New here? Create an account