This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
An Arduino UNO Flash and RAM update with the ATmega2560 as DIL 28 variant.
Project showcase by T.F. Mc Temucin
Bridging the gap between professional and DIY/hobbyist bench power supply.
Project showcase by prasimix
If you can't find a voltmeter at home or anywhere else, then this hack is for you!
Project showcase by Team Next Tech Lab
A RFID module connected to two LEDs.
Project showcase by Tech with Matthew
Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
Simple, easy to assemble, programming and use with block structure, Arduino-based soldering station.
Project showcase by lazyvlad
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects.
Project showcase by evive
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
Project showcase by Veldekiaan
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.
Project showcase by Team Tiny Ants
I used a Raspberry Pi 2 to make a mini data acquisition system that fits inside of a lunchbox.
Project showcase by Josh Makatura
project takes a simple RFID Reader and adds an LCD display to it.
Project showcase by Techinc1510
Easily include oscilloscope and frequency counter diagnostics into your own project.
Project showcase by
Connect your Arduino via WebUSB with an web application circuit simulator.
Project showcase by FreeGroup
This tester can be used for NiCd, NiMh, and all flavors of Li-Ion rechargeables.
I made a tool to program the Arduino Pro Mini without the need to solder pins to attach the USB bus port.
Project showcase by Ruben Zilzer
Easy DIY method to test capacitors.
Project showcase by brzi
Serial Communication between ESP2866-12 (NODE-MCU) and Arduino to increase the number of analog pins as my primary work.
Project showcase by Pawan Kumar
This project aims to provide insight into the workings of a digital oscilloscope. This project is designed to be an education tool.
Project showcase by wayri
Tinkercad is the largest community of 3D design enthusiasts of its kind! It is an online simulator on which projects can be made.
Project showcase by SHIVENDRA VATSA MISHRA
Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.
Project showcase by Team Shailza
Or connect with your social account:
New here? Create an account