Test all electronic components with Component Tester UNO Shield.
Project in progress by Akshay Baweja
This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.
Project in progress by philippedc
Based on a referenced project I implemented interleaved sampling for repetitive waves triggered at same point, achieving 3µs resolution.
Project in progress by claudiolenz
Rotary Encoder USB Control with single and double click action.
Project in progress by freermottram
A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc... )
Project in progress by willmendil
This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
Developing projects like commercial products
Project in progress by Altium Designer
Timer for Arduino pins controlled by Serial monitor
Project in progress by scardeath0101
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
This is a very simple way to control a 3-phase AC installation in a delta configuration.
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
Shows to visually impaired or ignoring the resistors colour code, lazy techs etc..., either the exact value or value in E12 or E24 series
Project in progress by rafu
Giving you the ability to add more buttons than analog inputs allow with some restrictions.
Project in progress by amosp33
Rodent behavioural test equipment is key for biological research yet expensive - our team is developing a low-cost alternative
Project in progress by 3 developers
An old CB transceiver is converted to the 50MHz amateur band using an Arduino Pro Mini, DDS, PLL and OLED display.
Project in progress by hvde
A raspberry pi based cereal phenotyping device
Project in progress by MacroImager
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Project in progress by Turai Botond
This device runs a desired length and quantity of wires and cuts each length.
Project in progress by 30percent
I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
I want to make a CD spot welder for battery packs or other stuff that cannot be soldered.
This is a library that allows any machine or robot to be controlled by G-code.
Project in progress by tinkersprojects
An open microbial bioreactor for growing cultures of about 1L.
Project in progress by Team Open Bioeconomy Lab
DMX512 tester display / receive or transmit the level of 1 of 512 DMX control channels.
Project in progress by KevinMcArthur
BBC Micro connects to WiFi, accesses games over the Internet.
Project in progress by 8bitkick
Or connect with your social account:
New here? Create an account