Let's learn how to use an infrared remote with an Arduino.
We used a TI FDC1004 breakout with an Arduino to measure liquid level in a bottle using the capacitance between two adhesive copper strips.
by Team ProtoCentral
Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
Measure and display an unknown resistance using Arduino uno
Project tutorial by xristos_xatz
This Project will show you how to Burn Hex File For Atmel Microcontroller using Arduino Uno.
Project tutorial by Patel Darshil
This article will show how to communicate between Arduino and Visual Studio through COM (UART) port.
Project tutorial by engineer2you
To create a source of ICs that i've investigated and written code for.
by Rich Noordam
Work with AT Commands using your SIM800L module.
Project tutorial by SetNFix
Clock LCD display adjustable.
Project tutorial by Tittiamo
Sample code on how to interface with the SN74HC165N IC so as to save data pins when dealing with a large amount of simple digital inputs.
Project tutorial by Matt Moore
Module tutorial, signal visualisation and a simple code to measure not only sinewave signals but all types, like TRMS Ammeter. + LCD/OLED.
Project tutorial by SurtrTech
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
How to connect incremental encoders for industrial use with RS-422 interface to an Arduino UNO.
Project tutorial by hwhardsoft
What? Program an Arduino from your Raspberry Pi? It's possible, and super easy!
by Zachary Haslam
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
Run Golang on this old but still popular 8-bit AVR microcontroller.
by Alan Wang
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
by Inventor Niv
A symmetric power source for audio amplifiers controlled by the Arduino's PWM with max output +-30v 10A.
Project showcase by Joao_Claro
A technique for drastically reducing the pins required by a matrix keypad is described.
Project tutorial by Giovanni Carrera
The cheapest micro soldering station in the world, using a cheap USB soldering iron.
Project tutorial by Paulo Bruckmann
Creating a digital to analog converter (DAC) 8-bit using resistor ladder (R-2R Ladder) and implemented it in Arduino Uno to create signals.
by Instrumentation System
Serial Communication between ESP2866-12 (NODE-MCU) and Arduino to increase the number of analog pins as my primary work.
Project showcase by Pawan Kumar
How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.
A battery charge checker on the base of Arduino
Project tutorial by Anton Nogin
Or connect with your social account:
New here? Create an account