This project shows how to do a basic machine learning on Arduino with CASP.

Using the existing RA-02 LoRa breakout board can be a challenge, due to all the required wires, required logic level converters etc...

How to implement a fully-functional SNMPv1 agent on an Arduino, using the uSNMP library.

This project implements a shield to connect a Braccio Robot Arm to an Arduino Due while maintaining backwards compatability.

Arduino LCD touch shield dual channel oscilloscope with equivalent time sampling

An external, detachable memory module allowing you to save those long programs that become a heavy task to rewrite.

Cirkit Designer is a software tool that makes it easy to design, document, and share your circuits!

Cirkit Designer is a software tool that makes it easy to design, document, and share your circuits!

If you're trying to log data from sensors fast, this device is promising. I have optimized the code for fast data logging for any sensor.

Two stepper motors and an Arduino to turn around an SMD part.

Arduino analog read at 77 kHz, no interrupts needed. Graphical representation of data on Serial Monitor.

The Bus-Powered RS485 Shield is an Arduino-compatible shield that allows full-duplex communication over long distances between 2+ Arduinos.

An Arduino shield to capture 2D/2DD floppy disk raw bitstream data and generates the emulator compatible disk image files (.D77/.D88).

Touchscreen single-trace oscilloscope for up to 10kHz signals with full functionality - 250uS to 200mSec/div, 125mV to 1V/div etc.

SNODE – is an open source library that allows to make it easy to build a multi-master serial bus network for hot-plugging nodes with sensors

Using the Arduino KNN library to classify the color of M&Ms we throw at it.

Timer to set a custom time for developing of UV sensitive PCBs with built in safety feature.

An Arduino camshaft measurement tool.

This is my version of a data logger using a INA219.

The focus of this study is to help students solve real-world problems using the automatic microcontrolled titrator by an Arduino

A USB based oscilloscope that squeezes everything out of the Arduino MKR / Zero ADC. It features Isochronous WinUSB transfer and OpenGL.

Secure your device with emrine.com QR code access control.

We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT

We implement RS-485 protocol in communication between two Arduinos using MAX485 module.