Work with AT Commands using your SIM800L module.
Project tutorial by SetNFix
Need fast cheap laser rangefinder for your Arduino project? You can use a laser tape measure for this!
Project tutorial by iliasam
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.
Project tutorial by saifalikabi
A simple PSU made with breakout boards and having a cool graphical display
Project tutorial by settorezero
Bridging the gap between professional and DIY/hobbyist bench power supply.
Project showcase by prasimix
Sonar + radar = Sodar. It eliminates camera at private places without compromising surveillance.
Project in progress by Tiny Ants
A digital device that visualizes analog signal.
Add Ethernet connectivity to the CNC Shield for Arduino. Control mills, lasers, and other devices with NEMA steppers over your network.
Project tutorial by Garrett Kendrick
Recently, I was in deep research on how to make our own Self Learning Universal Remote. So when I searched for the procedure of making this.
Project tutorial by Sachin Soni
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Project in progress by Turai Botond
Learn how to develop a Magnetically Levitated Ball using MATLAB, Simulink, and an Arduino Due.
Project tutorial by MATLAB Makers
Make a simple oscilloscope with Arduino MEGA 2560 and Processing
A large DIY Kossel XL RepRap 3D printer.
Project tutorial by Johnathan Hottell
This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.
Project in progress by philippedc
Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!
by Doctor Volt
A Boeing automated honeycomb repair system.
Project showcase by prodjallen
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
Project showcase by Veldekiaan
Get your Nano 33 IoT board connected to full GDB debugging so you can solve those bugs and get your project released!
Project tutorial by arduinocc
This project can help you measure the speed, distance and angle of the robot.
Project tutorial by Deion Adel
An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects.
Project showcase by Team evive
Machine learning does not have to be complicated models that cannot be deployed to MCUs, it could be a model-free learning algorithm.
Project tutorial by metrowest_AUG
Learn how get going with debugging on your Arduino Nano BLE, as well as build your own low cost debugger module in the process!
An ATmega88 high-voltage parallel fuse writer for Arduino.
Project tutorial by Hieromon Ikasamo
Cool little Pocket Metal Locator sensitive enough to identify small nails and tacks in wood with four independent search coils and LEDs.
Project tutorial by NZDoug
Or connect with your social account:
New here? Create an account