Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!
by Doctor Volt
If you're trying to log data from sensors fast, this device is promising. I have optimized the code for fast data logging for any sensor.
Project showcase by Varun Chandrashekhar
This project tutorial shows how to acquire, analyze and display air data on multifunction display using LabVIEW Graphic User Interface(GUI).
Project tutorial by tahiryasin5
Need fast cheap laser rangefinder for your Arduino project? You can use a laser tape measure for this!
Project tutorial by iliasam
Work with AT Commands using your SIM800L module.
Project tutorial by SetNFix
This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.
Project in progress by philippedc
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
Project showcase by Veldekiaan
Attempt to build an ultra-low cost molecular reactor, using computer controlled recirculating air.
Project tutorial by Jim Haseloff
How to display an image on an analog TV.
Project tutorial by Perozdero123
Sonar + radar = Sodar. It eliminates camera at private places without compromising surveillance.
Project in progress by Team Tiny Ants
If any of the projects you create are designed for portability or remote monitoring use, it usually requires the use of solar panels.
Project tutorial by Iasonas Christoulakis
Developing projects like commercial products
Project in progress by Altium Designer
This project can help you measure the speed, distance and angle of the robot.
Project tutorial by Deion Adel
Cool little Pocket Metal Locator sensitive enough to identify small nails and tacks in wood with four independent search coils and LEDs.
Project tutorial by NZDoug
Learn how get going with debugging on your Arduino Nano BLE, as well as build your own low cost debugger module in the process!
Project tutorial by arduinocc
A Boeing automated honeycomb repair system.
Project showcase by prodjallen
Get your Nano 33 IoT board connected to full GDB debugging so you can solve those bugs and get your project released!
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Project in progress by Turai Botond
A large DIY Kossel XL RepRap 3D printer.
Project tutorial by Johnathan Hottell
Learn how to develop a Magnetically Levitated Ball using MATLAB, Simulink, and an Arduino Due.
Project tutorial by Team MATLAB Makers
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.
Project tutorial by saifalikabi
Make a simple oscilloscope with Arduino MEGA 2560 and Processing
An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects.
Project showcase by evive
Extending Morse Code Transceiver to work with digital data. This project achieves a throughput of 20bps, 2x over Morse code.
Project tutorial by Achindra Bhatnagar
Or connect with your social account:
New here? Create an account