Things you should know using ESP8266 WiFi module for its safety and easiness as it's very delicate module to use.

In this tutorial, you’ll learn how to use SD and micro SD cards with Arduino in a simple project to measure the environment temperature.

An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

Learn programming ESP8266 with Arduino Boards. Installing ESP8266 board to Arduino Boards manager and uploading sample program to ESP-01.

Three ways to use Arduino as a USB to TTL converter. Helpful one!

Program your Arduino with an Android device over Bluetooth HC05.

In this tutorial, you will learn how to use RTC DS1307 module with Arduino to make a reminder.

As ESP8266 works on 3.3V and not 5v, it is important to perform this task.

This tutorial shows how to connect the ENC28J60 to the Arduino, download the library Ethercard and get it to work by loading an ex sketch.

Task scheduling is a transformative way to write maintainable code for Arduino and other AVRs. No more spaghetti code. C++ tutorial.

Make your hardware push data to a Google spreadsheet.

Measure rotation speed (RPM) with Optocoupler and Encoder disk and Arduino - Quick and Easy!

What? Program an Arduino from your Raspberry Pi? It's possible, and super easy!

Calibrating Atlas Scientific's EZO pH sensor using Arduino Uno.

Have a successful connection between Arduino and Raspberry Pi using I2C Communication Protocol.

With the coming .NET Core 3.0, cross-platform serial port is available. Let's have a try on RPi Raspbian.

In this I have shown how to send data from temperature sensor which is connected to Arduino and send data to Rpi database.

This project will show you how to transmit variables to control a servo motor.

A simple and inexpensive solution is to use a 'mobile power bank'

Arduino and Python-based project that will help us read the sensor values and plot it on Python.

A simple project, involving transferring value of a sensor, which is connected from one Arduino to another, and getting a required result.

A simple method to notify a problem is to use email, It’s very usefully and simple to share, so I created a library to do it.

How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.

Expand your board's storage with an I2C-enabled EEPROM chip.