Simple, easy to assemble, programming and use with block structure, Arduino-based soldering station.
Project showcase by lazyvlad
Use an Arduino board to control different gain coefficients from an operational amplifier.
Project showcase by lucian_vdo
That's a two-module chronometer for your MTB (or any others sports) to measure your time in a determined circuit!
Project showcase by Gabriele Scordamaglia
Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
An SPI config change for using a Nokia LCD.
Project showcase by Tom van Loon
A symmetric power source for audio amplifiers controlled by the Arduino's PWM with max output +-30v 10A.
Project showcase by Joao_Claro
Translate analog XY-plotter output to HP-GL command stream.
Project showcase by johan34
A simple protected power supply unit for Development Boards
Project showcase by Akash Kollipara
The purpose of this project was to the control an automatic gate with Arduino Nano using finite state machine method and interrupts.
Project showcase by Nuno Miguel Guerreiro Carvalho Martins and AndreNeves
An arduino uno mount bootloader shield for smd ATmega328p
Project showcase by Aj
Mini-thermostat with input for a 2-wire NTC thermistor and output for a resistive heating element. Plus code & schematics.
Project showcase by salhar1
An accessory for a beginners programming course: The shield aims on providing examples for the most common Arduino programming use cases.
Project showcase by Nicole J.
Training kit for Arduino teachers.
Project showcase by ArdLab_Gent
A homemade semi-automatic antenna tuner for HF controlled by an Arduino Nano.
Project showcase by ok1fig
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
This tester can be used for NiCd, NiMh, and all flavors of Li-Ion rechargeables.
Project showcase by sim-flynn-13
Arduino Nano-based, password-protected AC Main Console.
Project showcase by Boaz Lawnce
Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.
Project showcase by Team Shailza
I used a Raspberry Pi 2 to make a mini data acquisition system that fits inside of a lunchbox.
Project showcase by Josh Makatura
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
Or connect with your social account:
New here? Create an account