Give 16-bit digital output or get 16-bit digital input from any Arduino pins.
Project tutorial by ambhatt
Create a digital watch for Arduino combined with a 16x2 LCD Keypad Shield and using YAKINDU Statechart Tools.
Project tutorial by Robin Herrmann
Arduino programmers habitually utilize serial print for diagnostics; format that serial stream to spoof JSON and send on to Node-RED.
by Ray Burnette
FreeRTOS, simple, easy to use, robust, optimised for Arduino IDE.
Full access to FreeRTOS capabilities, within classic Arduino environment.
by Phillip Stevens
DIY Arduino hot air SMD rework station.
Project tutorial by Alexander and Maker B R
A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals.
Project in progress by Igor Fonseca Albuquerque
We used a TI FDC1004 breakout with an Arduino to measure liquid level in a bottle using the capacitance between two adhesive copper strips.
by Team ProtoCentral
Sketch of transistor tester project from Karl-Heinz Kübbeler, so it's much simpler to study, modify, verify and upload to an Arduino.
Project tutorial by plouc68000
I found the Arduino Leonardo to be a great way to manage my CNC machine with little programming effort.
Project tutorial by Erik de Ruiter
Send Arduino101 IMU data over BLE to your mobile device with Evothings and smoothie charts!
by Gregory O. Voronin
A small device that will help you sorting resistors without wasting time with their color code.
Project tutorial by Federico Vivaldi
With this simple circuit the analog output of Arduino Due start from zero
Project tutorial by Giovanni Carrera
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
I want to make a CD spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
Project tutorial by Alexander
Extension to Ben Eater's breadboard computer that allows saving/loading programs and works as a monitor, assembler and disassembler.
Project tutorial by David Hansel
This simple project shows how Arduino can be used with a RTOS. A special version of Arduino called ARTe was used for software development.
by Melvin Mancini
This is a tutorial on how to make it work.
by Tauno Erik
A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
The easiest way: install Parallax then upload the Arduino code.
by Mahamudul Karim Khondaker
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
Project tutorial by Shahariar
When it sees you, it won't stop following!
Project tutorial by Little_french_kev
Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
Interfacing Raspberry Pi with Arduino UNO
by Sankar Cheppali
Or connect with your social account:
New here? Create an account