Controlling power to the system using alarms based on voltages!
Project tutorial by T3ch Flicks
A small device that will help you sorting resistors without wasting time with their color code.
Project tutorial by Federico Vivaldi
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
Project tutorial by Alexander
A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.
Project showcase by Team Shailza
FreeRTOS, simple, easy, robust, and optimised for Arduino IDE. Using FreeRTOS Semaphores to share and protect physical resources.
by Phillip Stevens
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Project tutorial by raul
A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.
Project tutorial by Shahariar
Make your own mini oscilloscope at home. It’s simple and easy to do!
Project tutorial by PMGOHARIAN
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
A homemade semi-automatic antenna tuner for HF controlled by an Arduino Nano.
Project showcase by ok1fig
This project is all about making a power inverter using arduino. The Inverter produces 220VAC from 12V battery.
Project tutorial by Team Shailza
Single tap, double tap, triple tap, four-tap, Hold, Single tap and hold.
Did your somewhat expensive ($50) soldering iron just die? Well then fix it with another one!
Project tutorial by NoraTheDoggo
Your personal universal electronics kit. More I/O pins. More devices. More distances. Remote wireless control. No bunch wires.
Project tutorial by Steve Massikker
Use FreeRTOS (simple, easy, robust, & optimised for the Arduino IDE) to reduce the power required for battery or low power applications.
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
Project showcase by hminowa
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
Project tutorial by Joel Soranzo
Analyze the responses of a bandpass Butterworth and Chebyshev1 filter deployed to an Arduino Nano from the Wolfram Language.
Project tutorial by WolframMicrocontrollerKit
AKA how to build your own laboratory vortexer without spending a lot of money.
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
Or connect with your social account:
New here? Create an account