A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
Analyze the responses of a bandpass Butterworth and Chebyshev1 filter deployed to an Arduino Nano from the Wolfram Language.
Project tutorial by WolframMicrocontrollerKit
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
A Bluetooth multimeter capable of resistance, voltage, current and continuity measurement. Made with Arduino Nano.
Project tutorial by Federico Vivaldi
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Project tutorial by raul
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
Single tap, double tap, triple tap, four-tap, Hold, Single tap and hold.
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
A simple yet effective demonstrator of a gear pump endorsed with Arduino Nano + MPU6050 accelerometer to measure vibrations.
Project showcase by Team FRBB-MECHELEC
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
Project showcase by hminowa
Arduino Nano-based, password-protected AC Main Console.
Project showcase by Boaz Lawnce
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
Project tutorial by Joel Soranzo
FreeRTOS, simple, easy, robust, and optimised for Arduino IDE. Using FreeRTOS Semaphores to share and protect physical resources.
by Phillip Stevens
Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.
Project showcase by Team Shailza
Inexpensive to build but a very useful tool for every electronics laboratory.
Project tutorial by Mirko Pavleski
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
Project tutorial by Alexander
A homemade semi-automatic antenna tuner for HF controlled by an Arduino Nano.
Project showcase by ok1fig
Your personal universal electronics kit. More I/O pins. More devices. More distances. Remote wireless control. No bunch wires.
Project tutorial by Steve Massikker
Did your somewhat expensive ($50) soldering iron just die? Well then fix it with another one!
Project tutorial by NoraTheDoggo
A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.
Project tutorial by Madao
This circuit allows for one thermistor input and will output up to four similar values using digital pots.
by Kevin Strain
Or connect with your social account:
New here? Create an account