A simple to build, but very sensitive electromagnetic field detector.
Project tutorial by Mirko Pavleski
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
This code performs FFT with good accuracy.
Project tutorial by abhilash_patel
Build a 6x6 grid with an MPR121, expanding possible inputs from a mere 12 to 36!
Project tutorial by Arduino “having11” Guy
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
Project showcase by hminowa
Inexpensive to build but a very useful tool for every electronics laboratory.
MOTOR DRIVER L293D FOR DIY ROBOT KITS MADE BY SDTECH ROBOTICS L293D MOTOR DRIVER FOR 5-12V motor
Project tutorial by Shubham Devkar and Arbaz Khan
This project uses a micro SD card to store a text file and print it out to a 16x2 liquid crystal display.
Project tutorial by millerman4487
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
Use Arduino, an OLED display and an AD9833 DDS module to create a useful wave generator for your lab.
Project tutorial by janux
Make your own mini oscilloscope at home. It’s simple and easy to do!
Project tutorial by CiferTech
Purpose of this project is to write a code to control coin acceptor with Arduino so it can be used in other projects
Project tutorial by mdraber
This project is performing a faster frequency transform (FFT).
Program 6 ATtiny85/13A at the same time with this custom programmer board.
Project tutorial by Arnov Sharma
I was looking for ways to teach students the basics of PLC and found the OpenPLC project. Opensource, free and uses the IEC 61131 standard.
Controlling power to the system using alarms based on voltages!
Project tutorial by T3ch Flicks
A guide how to control 7 segment display with Shift register as well as daisy chain them to create multi digit displays
Rotary Encoder USB Control with single and double click action.
Project in progress by freermottram
A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc... )
Project in progress by willmendil
This is my version of a data logger using a INA219.
Project showcase by Claude (science 3d)
SNODE – is an open source library that allows to make it easy to build a multi-master serial bus network for hot-plugging nodes with sensors
Project showcase by Oleksandr Kornuta
We will use our M.P.U. 6050 to control a Graphic unit or say Model Paper Plane, which is commonly known as Teapot, with our M.P.U. 6050!
Project tutorial by Mission Critical
Timer for Arduino pins controlled by Serial monitor
Project in progress by scardeath0101
Or connect with your social account:
New here? Create an account