Sketch of transistor tester project from Karl-Heinz Kübbeler, so it's much simpler to study, modify, verify and upload to an Arduino.
Project tutorial by plouc68000
Shield A is an Arduino Uno based shield for student education compatible with BASCOM-AVR(C) and Arduino IDE.
by Robert Sedak
Android device controls Arduino's inputs and outputs using USB and serial protocol.
Project tutorial by Projecter
Morse Code decoder that can adjusts to LED bright level and demonstrates how to implement timer interrupt.
Project tutorial by shjin
Recently I’m getting a lot of queries regarding XBee, In this tutorial, I'm going to show you how to interface XBee with Arduino.
Project tutorial by Fouad_Roboticist
Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
When it sees you, it won't stop following!
Project tutorial by Little_french_kev
Create a digital watch for Arduino combined with a 16x2 LCD Keypad Shield and using YAKINDU Statechart Tools.
Project tutorial by Robin Herrmann
How to use a PCF8574 as a port expander (4I/4O) polling of the buttons without interrupt.
Arduino is used to measure frequency and duty cycle of pulses and display them on LCD.
Project tutorial by ambhatt
An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated. ]
Project in progress by Fransie Streicher and Kaamil-Inaam Naicker
A raspberry pi based cereal phenotyping device
Project in progress by Team MacroImager
We used a TI FDC1004 breakout with an Arduino to measure liquid level in a bottle using the capacitance between two adhesive copper strips.
by Team ProtoCentral
The project shows you how to configure flexibly user variables via Web without hard-coding. Setting Schedule via web is an example.
Project tutorial by phpoc_man
Thermistor as thermometer.
Project tutorial by Marcazzan_M
Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
Project simulator control and display encoder motor.
Mini-thermostat with input for a 2-wire NTC thermistor and output for a resistive heating element. Plus code & schematics.
Project showcase by salhar1
A battery charge checker on the base of Arduino
Project tutorial by Anton Nogin
This Arduino-powered Web Oscilloscope supports trigger, and changing voltage/div, offset and time / div. It supports 6 channels.
This library creates an 8-bit IO port for Arduino by combining any 8 Arduino pins. With this library, one can send/get direct 8-bit data.
An Arduino NTSC/PAL video display shield with integrated framebuffer and composite video output.
Project showcase by wfriedrich
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
Project tutorial by Shahariar
Or connect with your social account:
New here? Create an account