A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals.
Project in progress by Igor Fonseca Albuquerque
FreeRTOS, simple, easy to use, robust, optimised for Arduino IDE.
Full access to FreeRTOS capabilities, within classic Arduino environment.
by Phillip Stevens
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
We used a TI FDC1004 breakout with an Arduino to measure liquid level in a bottle using the capacitance between two adhesive copper strips.
by Team ProtoCentral
Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
Project tutorial by Alexander
Training board for essential logic gates.
Project tutorial by saifalikabi
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Project tutorial by raul
The easiest way: install Parallax then upload the Arduino code.
by Mahamudul Karim Khondaker
An open microbial bioreactor for growing cultures of about 1L.
Project in progress by Team Open Bioeconomy Lab
This Arduino-powered Web Oscilloscope supports trigger, and changing voltage/div, offset and time / div. It supports 6 channels.
Project tutorial by phpoc_man
Intro to using FSMs in your IoT projects.
by Gustavo Gonnet
Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
Project tutorial by Shahariar
In this tutorial I will explain how to use the TIMER0 of Arduino
Project tutorial by Marcazzan_M
Simple, easy to assemble, programming and use with block structure, Arduino-based soldering station.
Project showcase by lazyvlad
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
DIY Arduino hot air SMD rework station.
Project tutorial by Alexander and Maker B R
A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.
Power management for portable Arduino projects.
Project tutorial by craic
This project uses an ultrasonic distance sensor to create a pocket of wave interference where a small object can be levitated.
Project tutorial by millerman4487
Ever wonder how much filament you actually used for a project or have an old mechanical ball mouse laying around to be recycled?
Project in progress by ArtSuzhou
Send Arduino101 IMU data over BLE to your mobile device with Evothings and smoothie charts!
by Gregory O. Voronin
Or connect with your social account:
New here? Create an account