A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals.
Project in progress by Igor Fonseca Albuquerque
An open microbial bioreactor for growing cultures of about 1L.
Project in progress by Open Bioeconomy Lab
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
Ever wonder how much filament you actually used for a project or have an old mechanical ball mouse laying around to be recycled?
Project in progress by ArtSuzhou
I want to make a CD spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
BBC Micro connects to WiFi, accesses games over the Internet.
Project in progress by 8bitkick
This is a library that allows any machine or robot to be controlled by G-code.
Project in progress by tinkersprojects
Quality microcentrifuges are generally too expensive for most people to afford. This project aims to provide a low-cost alternative.
Project in progress by kemfic
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
Project in progress by philippedc
I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Ease of Python programming on the powerful Arduino Due.
Project in progress by AdiK
Re-circulation infusion mash system library for Arduino.
Project in progress by francisgagnon9
Giving you the ability to add more buttons than analog inputs allow with some restrictions.
Project in progress by amosp33
A high power and highly programmable smart battery charger, LED driver and programmable DC source all in one.
Project in progress by PowerShield0621
MEGA BREAD series #4, the 4 by 4 input keypad.
Project in progress by Pigeon-Kicker
Universal IR receiver and transmitter for home automation and replica of any IR remote control (air conditioners included); uses WAMP.
Project in progress by msillano
Gizmo to measure the running speed of the shutter on a film camera
Project in progress by Jes Consuegra
Using Arduino Serial Plotter and LDR to watch effect of capacitors to stabilize circuits.
Project in progress by caioreginato
A sensor-pump system which would be able to adjust drug output of aminoglycosides based on real time sensing of drug in plasma.
Project in progress by Biomaker Challenge 2017: Team 14
A raspberry pi based cereal phenotyping device
Project in progress by MacroImager
A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc... )
Project in progress by willmendil
Based on a referenced project I implemented interleaved sampling for repetitive waves triggered at same point, achieving 3µs resolution.
Project in progress by claudiolenz
Or connect with your social account:
New here? Create an account