Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
A system to truly control power saving for any project which is made using a development board that isn't power saving in nature!
Project tutorial by Shahariar
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
by Naresh krish
Measure CO2 levels.
Project tutorial by alfred333
This is a simple tutorial to create an EMF detector using an ATtiny85 microcontroller.
Project tutorial by Giovanni Gentile
A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.
We train the Intel Arduino 101, with a 128 node hardware neural network chip created by General Vision, to recognize OCR MNIST characters.
by Marcus O'Brien
An enclosure for the Arduino Uno that not only allows you to see inside, but locks down wires coming out to keep them secure.
Project tutorial by Jeremy S. Cook
A high power and highly programmable smart battery charger, LED driver and programmable DC source all in one.
Project in progress by PowerShield0621
FreeRTOS, simple, easy to use, robust, optimised for Arduino IDE.
Full access to FreeRTOS capabilities, within classic Arduino environment.
by Phillip Stevens
Access GPIO of Arduino from RPi using Firmata & JAVA over USB (Serial).
by Bikash Narayan Panda
A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals
Project in progress by Igor Fonseca Albuquerque
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
Project tutorial by Alexander
Send Arduino101 IMU data over BLE to your mobile device with Evothings and smoothie charts!
by Gregory O. Voronin
This project will show you how to make a wireless upload Arduino code from your Computer via Bluetooth.
Project tutorial by Youssef
A realtime battery indicator for your project without extra components or using any analog I/Os.
Project showcase by Arduino World
Interfacing Raspberry Pi with Arduino UNO
by Sankar Cheppali
Power management for portable Arduino projects.
Project tutorial by craic
The first run and the first troubles with the Arduino MKR 1000. FAQ.
by Anton Nazarenko
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
FreeRTOS, simple, easy, robust, and optimised for Arduino IDE. Using FreeRTOS Semaphores to share and protect physical resources.
Or connect with your social account:
New here? Create an account