A plug-n-play device to give birth to bare bone clone Arduino by uploading bootloaders on different AVR chips.
Project tutorial by Shahariar
Using the technique I'm going to show you it was measured to be 259.91Hz ... only 0.09Hz away from an Exact Middle C Frequency of 260Hz.
Project tutorial by Anthony Kelly
A simple method to power a servo on or off from the Arduino, using a NPN Darlington Transistor (TIP-120) and an Arduino.
Project showcase by Kevin Gagnon
Thinking about presenting Arduino I/O on your desktop and do some debugging, logging and trending? Take a look at the AFSM.
A system to truly control power saving for any project which is made using a development board that isn't power saving in nature!
Thermistor as thermometer.
Project tutorial by Marcazzan_M
See how much battery you have left!
Project showcase by Arduino_Genuino
Effortlessly roll your own smart home applications with drag-and-drop Alexa 'aware' controls in the Virtual Breadboard Microsoft Store App.
by James Caska
Demonstration of the I2C protocol. A simple example of turning the Arduino's internal LED on from a Raspberry Pi using I2C
Project tutorial by aardweeno
Simple instruction to let you know how to control an AC voltage device using an IR remote control and the Arduino.
by Mohannad Rawashdeh
How about we connect an Arduino to our mobile browser, run Node-RED and Johnny-Five on the browser.
by Ron Dagdag
Arduino Robot Service Oriented Architecture - In this article we'll create a Service to control a HC-SR04 Distance Sensor.
Project tutorial by Nahuel Taibo
Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.
Project showcase by Team Tiny Ants
The ESP8266 is great for connecting your Arduino to the internet - these instructions aim to get you online as simple and fast as possible.
How to use the new Arduino SDU library for SAMD boards to update the sketch on your board, putting it on an SD!
Ease of Python programming on the powerful Arduino Due.
Project in progress by AdiK
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
by Josh From BreakoutBros.com
Android device controls Arduino's inputs and outputs using USB and serial protocol.
Project tutorial by Projecter
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
A useful and easy way to control AC Lamp using a motion sensor and Arduino board.
The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
by Naresh krish
You can flash your ESP-01 and esp-201 (Maybe work with other models) with Arduino IDE and upload any other firmware with ESP flash tools.
Project tutorial by Gustavo Reynaga
How to Set up a MASTER-SLAVE connection between two Arduinos using I2C (Inter-Integrated Circuit) protocol.
Or connect with your social account:
New here? Create an account