Works on all resin.io supported devices (beagle bone, all rpi etc) and all Arduino boards.

CapSense touch-sensing buttons or proximity sensors for Arduino Uno, using the Cypress CapSenseMBR3 Kit

Programming interface that gives your Arduino DUE read/write access to all of your computer drives through USB.

Compact board to program an ATtiny using an Arduino UNO.

Simple enclosure and breadboard to mount Arduino MKR boards in a cabinet for prototyping.

In depth tutorial on how to design a PT100 circuit.

How fast can you toggle an IO pin?

Add Ethernet connectivity to the CNC Shield for Arduino. Control mills, lasers, and other devices with NEMA steppers over your network.

Hack an old controller and use it as a combination of a keyboard and a mouse.

Use an Arduino board to control different gain coefficients from an operational amplifier.

This brick will allow you to include addressable LEDs in your LEGO models.

Consider this the "Blinky LED" of the anduinoWiFi shield!

Mini-thermostat with input for a 2-wire NTC thermistor and output for a resistive heating element. Plus code & schematics.

This is a project to make a focus stacking rail from a piece cut out of an old microscope.

Append Temperature and Humidity Values to a Google Spreadsheet.

In this tutorial you will see how you can output analog values from LabVIEW and ow combine it with current knowledge.

Store Arduino Uno project settings in your choice of internal or external EEPROM, using simple Embedis "set" and "get" commands.

MEGA BREAD series #4, the 4 by 4 input keypad.

This lesson is just an introduction to USB in order to give you a working knowledge of what's happening with USB.

This example demonstrates how to store data in a table in MySQL from 4 button connected to pins 2, 3, 4, 5 direct connection.

How to make your project from breadboard to prime time using Upverter.

Presented here are the Arduino Mini Shields. These shields are very easy and fun to make, and you can make your own custom shield from this.

Frequency counter and voltmeter for Android phone or tablet using Arduino and Bluetooth.

Turn any Arduino compatible board into an IoT device with the Octoblu Johnny-Five Connector. Visually program with hardware on the web.