With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
I will show you how to link your PocketCHIP to an Arduino using a HC-05 Bluetooth module.
by Josh From BreakoutBros.com
Bluetooth communication between Arduino and the PC using a small interface programmed in Processing.
Project showcase by victruino
Work with AT Commands using your SIM800L module.
Project tutorial by EasyMades
Display an output on the LED bar graph based on the serial command received from the host.
Project tutorial by ejshea
μcuREST is a C++11 library for implementing REST services on constrained platforms, such as bare metal applications on low-end MCUs.
by Eugene Hutorny
Using your computer to control the PWM value in your Arduino.
Project tutorial by Super Kid
MEGA BREAD series #4, the 4 by 4 input keypad.
Project in progress by Pigeon-Kicker
This PWM Learning Board helps students to understand the PWM concept. What is it and how it works.
Project showcase by lmsousa
Control a brushless DC fan with an N-Channel MOSFET.
Hack an old controller and use it as a combination of a keyboard and a mouse.
Project showcase by pdio
IR receiver and a buzzer.
Everywhere it's specified that A.Due has same pin layout with Arduino Mega, so you can use Mega's Sensor Shield on Due.
Project showcase by tolgadurudogan
Last time I did the hot wire foam cutter, but I missed the temperature control. So that's why I made a simple PWM control.
Project tutorial by adachsoft.com
This time we are going to make the casing for a remote control made with Arduino Micro, IR-sensor and an LED.
Project tutorial by kengdahl
Enhance IoT device and application performance, optimize power efficiency, and speed time-to-market with this cross-platform tool suite.
Project tutorial by 3 developers
This is a library to use Software Serial and add parity to the transmitted character. Odd, Even or None can be defined.
Project tutorial by Luke J. Barker
How to go from theory to a practical working prototype.
by Marc De Loor
Give 16-bit digital output or get 16-bit digital input from any Arduino pins.
Project tutorial by ambhatt
This alarm will turn on a buzzer and the bulb when the capacitance sensor senses something. And show you how to make the sensor yourself!
Project tutorial by muhammed shameel k.v
It's an elevator with automatic doors. The code has two FSM, one for the motor that makes it go up and down and one for the automatic door.
The PTHAT has been designed primarily to fit and work with the Raspberry Pi, it can also be used with other MCUs such as the Arduino boards.
by Team CNC Design
I built the right and left mouse buttons with wall switches.
An accessory for a beginners programming course: The shield aims on providing examples for the most common Arduino programming use cases.
Project showcase by Nicole J.
Or connect with your social account:
New here? Create an account