A battery charge checker on the base of Arduino
Project tutorial by Anton Nogin
This Arduino-powered Web Oscilloscope supports trigger, and changing voltage/div, offset and time / div. It supports 6 channels.
Project tutorial by phpoc_man
This library creates an 8-bit IO port for Arduino by combining any 8 Arduino pins. With this library, one can send/get direct 8-bit data.
Project tutorial by ambhatt
Arduino and Python-based project that will help us read the sensor values and plot it on Python.
by Asim Zulfiqar and High Voltages
Regulated smart constant current charger for 9V NiMH rechargeable batteries.
Project tutorial by Alex Stepanov
An Arduino NTSC/PAL video display shield with integrated framebuffer and composite video output.
Project showcase by wfriedrich
Writing only Arduino code, it is easy to set up control over experiments and display results on your PC's panel application.
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
Project tutorial by Shahariar
How to design circuits that allow you to drive a load that needs a higher value of voltage or current than Arduino can drive.
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
by Renzo Mischianti
More complex microcontroller projects often require a menu-driven interface. This library for XOD can help autogenerate them from a diagram.
Project tutorial by Matthew Hamer
Logic Analyzer, for Arduino, other AVR and STM32 with a very nice working processing interface, you could run it also on any Android device.
Project tutorial by Vincenzo G.
Using a IR proximity sensor and microcontroller to find the local values of 'g' and will plot a real time damping curve.
Project tutorial by CodersCafe
This code enables you to make an accelerometer and gyroscope give the best results.
Project in progress by OZTL
My second meetup explored I/O while building a sequencer. This is the project writeyp for that event.
Project tutorial by Elijah Scheele
A simple method to notify a problem is to use email, It’s very usefully and simple to share, so I created a library to do it.
Scratch is a great tool to teach beginners how to code, program interactive stories, and do Physical Computing!
Project tutorial by MJRoBot
An Arduino powered floppy disk controller and reader for making disk images from old AmigaDOS floppy disks.
Project tutorial by Team RobSmithDev
A simple protected power supply unit for Development Boards
Project showcase by Akash Kollipara
In this tutorial, I am going to show you how to build a voltmeter with a big Nokia 5110 LCD display using Arduino.
Project tutorial by Nick Koumaris
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
Embedis is a library for creating simple embedded key-value servers using non-volatile storage like NVSRAM, FRAM, FLASH, or EEPROM.
by Team thingSoC
Hello world! Yep yep, I made another simple project. This time for the KY-021 Mini reed switch. It will simply turn on and off a lamp.
Project showcase by Danny van den Brande
Works on all resin.io supported devices (beagle bone, all rpi etc) and all Arduino boards.
by Craig Mulligan
Or connect with your social account:
New here? Create an account