Bridging the gap between professional and DIY/hobbyist bench power supply.
Project in progress by prasimix
Work with Slic3r and the Materia 101 and print a pirate hook.
Project tutorial by kengdahl
FreeRTOS, simple, easy, robust, and optimised for Arduino IDE. Using FreeRTOS Semaphores to share and protect physical resources.
by Phillip Stevens
Use FreeRTOS (simple, easy, robust, & optimised for the Arduino IDE) to reduce the power required for battery or low power applications.
Learn the basics of code and electronics using Circuito.io and make a simple Arduino project in 3 minutes.
Project tutorial by circuito.io team
Learn how to submit your project made with Arduino and Genuino boards, it may get featured on the Arduino social channels!
How to connect the Arduino MKR 1000 with the WiFi.
by Anton Nazarenko
Did you ever wonder what happens between the time you click on "Upload" and your sketch starts running? Here's how you can find out...
Learn how to solder and debounce a switch.
Project tutorial by Jennifer Chen
How to make a cable that can connect your Arduino board to a TV RCA video jack. Put your Arduino on the big screen!
Project tutorial by Paul Scott
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
Make the smallest Arduino possible with just an ATtiny85 8-pin DIL-IC running in 8MHz from an internal Oscillator.
by Kristian Blåsol
Logic Analyzer, for arduino and other AVR with a very nice working processing interface, you could run it also on any android device.
Project tutorial by Vincenzo G.
I used a Raspberry Pi 2 to make a mini data acquisition system that fits inside of a lunchbox.
Project showcase by Josh Makatura
The Arduino is simple, cheap and power efficient but has limitations. Sometimes, you may want to have more than one access your I2C bus.
by Chip McClelland
A simple and inexpensive solution is to use a 'mobile power bank'
by Giovanni Carrera
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
by Alex Glow
This tester can be used for NiCd, NiMh, and all flavors of Li Ion rechargeables.
Project showcase by sim-flynn-13
Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.
Project showcase by Team Tiny Ants
Using the technique I'm going to show you it was measured to be 259.91Hz ... only 0.09Hz away from an Exact Middle C Frequency of 260Hz.
Project tutorial by Anthony Kelly
Or connect with your social account:
New here? Create an account