This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
Bridging the gap between professional and DIY/hobbyist bench power supply.
Project showcase by prasimix
If you can't find a voltmeter at home or anywhere else, then this hack is for you!
Project showcase by Team Next Tech Lab
Everyone needs a good scale in kitchen, what better than to build a high precision scale with the UNO?
Project showcase by Fedeasche
Simple, easy to assemble, programming and use with block structure, Arduino-based soldering station.
Project showcase by lazyvlad
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
Why are even the modern day cars are not equipped with biometric entry system? Here is an attempt on a Toyota C-HR.
Project showcase by Rajeev Velikkal
An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects.
Project showcase by evive
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.
Project showcase by Veldekiaan
This tester can be used for NiCd, NiMh, and all flavors of Li-Ion rechargeables.
Project showcase by sim-flynn-13
Serial Communication between ESP2866-12 (NODE-MCU) and Arduino to increase the number of analog pins as my primary work.
Project showcase by Pawan Kumar
Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.
Project showcase by Tiny Ants
Easily include oscilloscope and frequency counter diagnostics into your own project.
I used a Raspberry Pi 2 to make a mini data acquisition system that fits inside of a lunchbox.
Project showcase by Josh Makatura
Connect your Arduino via WebUSB with an web application circuit simulator.
Project showcase by FreeGroup
I made a tool to program the Arduino Pro Mini without the need to solder pins to attach the USB bus port.
Project showcase by Ruben Zilzer
This project aims to provide insight into the workings of a digital oscilloscope. This project is designed to be an education tool.
Project showcase by wayri
Tinkercad is the largest community of 3D design enthusiasts of its kind! It is an online simulator on which projects can be made.
Project showcase by SHIVENDRA VATSA MISHRA
Step by step approach is followed so that any hobbyist or design engineer can have a better understanding of the basic concepts.
Project showcase by Shailza
How hard can you throw a ball In this project, we discover the wonderful world of acceleration.
Project showcase by Team Zeijlon Systems
Translate analog XY-plotter output to HP-GL command stream.
Project showcase by johan34
A simple self contained Scalar Network Analyzer. It is used for testing and alignment of RF circuits, including amplifiers and filters.
Project showcase by DuWayne Schmidlkofer
Easy way to control variables with one rotary encoder and OLED display.
Project showcase by yilmazyurdakul
Or connect with your social account:
New here? Create an account