Arduino controlled PWM chopper, acceleration and deceleration ramp, motor braking, OLED display and a little more...

A difficult code with a try to display waveform on a small screen with precisions. Volts-time, frequency, duty cycle and divisions.

Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.

An old CB transceiver is converted to the 50MHz amateur band using an Arduino Pro Mini, DDS, PLL and OLED display.

DMX512 tester display / receive or transmit the level of 1 of 512 DMX control channels.

An open microbial bioreactor for growing cultures of about 1L.

This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno

A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals.

This code enables you to make an accelerometer and gyroscope give the best results.

It's a language that allows the arduino to change programs at runtime, without having to reupload a sketch to it.

This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.

The Mega-Bread project is alive and well!

There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.

Test all electronic components with Component Tester UNO Shield.

Sonar + radar = Sodar. It eliminates camera at private places without compromising surveillance.

Based on a referenced project I implemented interleaved sampling for repetitive waves triggered at same point, achieving 3µs resolution.

BBC Micro connects to WiFi, accesses games over the Internet.

This is a library that allows any machine or robot to be controlled by G-code.

Ease of Python programming on the powerful Arduino Due.

Gizmo to measure the running speed of the shutter on a film camera

Rotary Encoder USB Control with single and double click action.

A small little console that allows you to quickly set, test, try many different actuators (e.g. servos, stepper, ultrasonic, DHT22, etc... )

Timer for Arduino pins controlled by Serial monitor

Re-circulation infusion mash system library for Arduino.