Use an Android device to control the color of a NeoPixel via a Bluetooth connection.
Project tutorial by Bryce K and Lucas W
The short project for beginners to get some practice in using LED lighting with the sound sensor.
Project tutorial by Mantas Utka
A simple Arduino assembly that checks temperature and sets an RGB LED from blue to red.
by Benjamin Larralde
This is my project about an Analog Clock on a LED matrix and Arduino.
Project in progress by LAGSILVA
Have a very happy birthday celebration using this simple Arduino device that plays the happy birthday tune while flashing lights!
Project tutorial by jsheng
Build a simple LED throwie, then make it smart with an Arduino.
by Alex Glow
Why you can blank, void setup()
Arduino project #12 follow-up video. Now using common anode RGB LEDs.
Project tutorial by HeathenHacks
Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.
Project tutorial by DCamino
RGB LED backlight with audio signal visualization for room/desk backlightning...
Project tutorial by PhilKey
In this project I will show you how to build a simpler version of a 5x5x5 LED Cube. It means commanding 125 LEDs using one Arduino board
by MEGA DAS
This project will show you how to fade lights, add a button to it.
Project tutorial by Phuong Vo
Simulate a traffic light using an Arduino and LEDs! This project is super cool to watch and easy to make!
Project tutorial by Zachary Haslam
A simple project to add animated (marquee) lighting to your arcade cabinet or other project with an Arduino Nano and NeoPixels.
Project tutorial by ericBcreator
Project tutorial by Alex Jonsson
Arduino and NeoPixel Tutorial appropriate for a beginner.
by Elijah Scheele
Got a KY-016? Stick it straight onto your UNO and start attracting unicorns! No soldering. No schematics. No freaking Fritzing.
Project tutorial by Johan_Ha
Make an Alexa clone using Raspberry Pi 3 and use it to control IOT RGB Lamp (Arduino Nano + ESP8266) that supports Philip Hue commands.
Project tutorial by Pham Hoang Son
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Lights that turn on when they receive an infrared signal from an old TV remote.
Project showcase by jsheng
I will show you how can you turn the LEDs on via the Colors button on your remote control.
Project tutorial by ismystore
An arduiNOOB friendly tutorial for beginners on daisy-chaining.
Learn how to interface a 4x3 matrix keypad and display its values to an LCD display.
by David A Riewe
A Hackster logo badge made with LEDs from Elegoo.
Project tutorial by Michael Darby - 314Reactor
Or connect with your social account:
New here? Create an account