Flashy LED decor lights that respond to your bike's motion.
Project tutorial by Leon Chu
Low-cost outdoor lights with DMX control.
Project tutorial by Sebastian Wiessner
A simple Ping Pong game played on a NeoPixel Ring with Arduino.
Project showcase by aerodynamics
This is a simple IR sensor block detector for model railroads. It controls three lights: red, yellow and green.
Project in progress by lecurtis
It's a dimmer switch! Create your own touch interface for controlling your Philips Hue lights using Bare Conductive's conductive paint.
Project tutorial by Brian Carbonette
Riding bike is a little dangerous. With the direction indicators for a bike, cars know if you want to turn right or left. Make biking safe!
Project tutorial by Rosaliew
Driving a dot matrix display with Arduino using data from a Winamp plugin.
Project showcase by raul
This whole circuit is the same size as a regular poker chip, but with an added surprise: lights!
Project tutorial by Alex Wulff
This topic will teach you how to control a RGB LED on an Arduino 101 board with an Android device (MIT App Inventor).
Project tutorial by DFRobot and CAVEDU Education
Arduino Nano bike bag signals, controlled by a wireless (RF) RC attached to front handle.
Project showcase by Sam
Phillips made what is called Ambilight, a backlight that responds to what is on screen, but we made it bigger.
Project in progress by Dan Fein
Using an Arduino, light detecting resistors, and RGB LEDs, I made a fun to use, miniature spectrometer.
Project showcase by Team RadSensors
Automating traffic road crossing signal, will turn red only when there is some presence of pedestrians waiting to cross.
Project showcase by Adersh B
Luminous ball, with clock and thermometer, controlled by Blynk.
Project tutorial by Tittiamo
A quilted fabric clock with NeoPixels, that tells time using an Arduino Uno!
Project showcase by Team Chris And Jessica Hogan
This is part one of the music visualizer series. In the following tutorial, we are going to make a music visualizer.
Project tutorial by kj electronics
You just bought a RGB LED strip kit and you would like to get rid of that cheap hand-held IR remote and to have REAL control.
Project tutorial by Philippe Libioulle
Motion lamp is a prototype that allows controlling an RGB light lamp through movement with Arduino 101 and NeoPixel Strip.
Project tutorial by Team Programarfacil
I made an LED eyeball controlled by a Nintendo Wii Nunchuck Controller.
Project tutorial by HomeMadeGarbage
Move your drone racing skills to the next level with these interactive air gates!
Project tutorial by circuito.io team
This project is light show made by powering 168 LEDs with an Arduino Mega and an Arduino Mini along with a Serial MP3 Player.
Project showcase by BUInvent
This project is dedicated to my parents, but you can also use it for surprise events for someone special.
Project tutorial by Muhammad Afzal
Valentine week is almost here; it's a perfect time to build something for your special one and what else could be better than blinking LEDs?
Project showcase by AdiK
Simple device to control and initialize DALI lamps.
Project in progress by NabiyevTR
Or connect with your social account:
New here? Create an account