This project allows the user to create their own light animations!
Can modify each frame, the speed, and loop count.
Project tutorial by Reid Paulhus
Simple device to control and initialize DALI lamps.
Project in progress by NabiyevTR
This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.
Project tutorial by HeathenHacks
A 6x6x6 LED cube capable producing any type of pattern, including live preview and animations.
Project tutorial by AdiOdi
Athlete training device helps to enhance the response speed of players through optical stimulation.
Project tutorial by Team Science Camp
Here We are going to make a light cube which will change color accordingly with surrounding sounds. This work is featured in Hackspace mag
Project tutorial by Najad
Pedestrian walk cycle will only occur when both lights are red AND button has been pressed.
Project showcase by FalcomDigital
Using an Arduino Nano on an expansion board with a push-button to change the color palette mode of the RGB LED strip.
Project tutorial by Cory Potter
You’ll learn about IR protocol and how to use the IR receiver module.
It uses LDR to sense light intensity and LEDs to vary light intensity. It uses arduino as controller and LCD to display light intensity.
Project tutorial by ambhatt
It has some LEDs inside something that refracts.
Project showcase by lebo
RC light controller for driving 5 banks of 4 ws2812 led lights, using throttle, sterring, and chanel3 of an RC car.
Project showcase by Team RC Stuff
In this project, we will print out Morse Code of a sentence typed in Serial Monitor by flashing LED for each word and space between them.
Project showcase by Team ONYX
I made two NeoPixel sabers controlled by Arduino, with plumbing part hilts that look nice, and animated party modes.
Project tutorial by Modustrial Maker
This project is light show made by powering 168 LEDs with an Arduino Mega and an Arduino Mini along with a Serial MP3 Player.
Project showcase by BUInvent
How to hack an ikea dioder to make it an IoT device. The project uses the mysensors opensource libraries.
Now, you can control your light system in your home using your voice , by talking to your systems which to turn on and which to turn off
Project tutorial by Maha Raafat
Using the microphone of your mobile phone to control the led cube according to the loudness (decibels).
Project tutorial by Hassan Ibrahim
An indoor thermometer with LCD and "analog" readouts.
Project tutorial by Jonathan Eskow
Ambientlight for Raspberry PI and Kodi
Project in progress by Pierre Den Gode
A 3D-printed snowflake made with Arduino Uno. Has 91 addressable RGB LEDs.
Project in progress by James Cameron
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Project tutorial by Dmitrii ALBOT
A lamp which changes color according to the tweets of people.
Project showcase by Kaustubh Agarwal
Use Arduino to run a spectacular Christmas light show. (Both in English and Spanish, en Ingles y Español.)
Project tutorial by Victor Aguilar
Or connect with your social account:
New here? Create an account