Automate your Christmas tree and get notified when motion is detected around the tree!
Project tutorial by Benny Estes
A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.
Project showcase by Auri B
This is part one of the music visualizer series. In the following tutorial, we are going to make a music visualizer.
Project tutorial by kj electronics
A model lighthouse, built with 3D printing, using an Adafruit NeoPixel Ring for the lights.
Project tutorial by Jeremy Lindsay
Light up three different LEDs using pulse width modulation corresponding to different ranges of analog input voltages.
Project tutorial by Ian Etheridge
Supersede your old desk lamp with a new one controlled by an RFID tag or card and personalize it with an RGB color pattern to turn it off.
Project tutorial by Kutluhan Aktar
If you ever have watched knight rider you will remember K.I.T.T and his Scanner, we will replicate this using 6 Neopixels.
by Austin Detzel
Make your skateboard a little more flashy!
Project tutorial by Dante Roumega
I will show you how can you turn the LEDs on via the Colors button on your remote control.
Project tutorial by ismystore
RGB LED connected with Arduino Nano and Bluetooth module and control with Android mobile app.
Project tutorial by DIY Partners
Using Arduino and WIZ750SR to control the smart building lighting system.
Project tutorial by S2ELighting
This is a wooden Christmas tree I made, using LEDs for the star at the top and the garland on the tree.
Project showcase by Arduino_Jarod
Simple but meaningful project to ask a girl to be your girlfriend using an LED matrix & Arduino. (We aren't responsible for broken hearts.)
Project tutorial by Arturo Rosete
A simple IR receiver setup controlling 2 LED by a relay board
A simple project with an Arduino and NeoPixels, animating the LEDs in Christmas colors.
Project tutorial by ericBcreator
In this project, I am going to demonstrate how to make different patterns on a LED ring with the help of the idIoTware shield.
by Rupin Chheda and Ravi Parmar
Make a people counter that detects the number of people who enter the room using lasers and LDRs and control it with an Android app.
Three LED and a switch equals railroad crossing lights.
Project showcase by eldo85
In this project I made a Morse code transmitter using Arduino and Winform application.
Project showcase by Alireza Karkon
It has some LEDs inside something that refracts.
Project showcase by lebo
Snap Circuits® makes learning electronics easy and fun! These projects are designed for younger kids who want to get introduced IoT.
Project tutorial by Daniel Porrey
A fun project where you get colorful blinks depending on the RFID ID.
Project showcase by Werzaire
A light source and show... without buttons!
Project showcase by MicroBob
Make the cozy shisha nights unforgettable.
Project tutorial by Turai Botond
Or connect with your social account:
New here? Create an account