Christmas is coming and you know we had to build something that would put the entire neighborhood into the Christmas spirit!
Project showcase by Savva Osipov
In this project I will show you how to build a simpler version of a 5x5x5 LED Cube. It means commanding 125 LEDs using one Arduino board
by MEGA DAS
Arduino-controlled Christmas Tree lit by 150 digital RGB LED pixels. The RTC chip switches on and off the tree at the planned hours!
Project tutorial by Martino Ghisleni
Control 8 x 8 (64) LEDs using two 74HC595 shift registers as fast as possible using SPI and PORT access. (Updated 19 Jan, 2019)
Project showcase by Jegqamas
A simple project to show a clock on a wall with just one small laser and a rotating mirror.
This project will show you how to fade lights, add a button to it.
Project tutorial by Phuong Vo
This is part one of the music visualizer series. In the following tutorial, we are going to make a music visualizer.
Project tutorial by Team kj electronics
This project will show you how to make a DIY flashing LED cube.
Project tutorial by STEMpedia
This project is light show made by powering 168 LEDs with an Arduino Mega and an Arduino Mini along with a Serial MP3 Player.
Project showcase by BUInvent
Measure humidity and temperature levels in your home to avoid unhealthy air quality with this fun project.
Project showcase by KatjaNiggl
Smooth real time Fade & Dimm up to 20 LEDS with normal digital IO's
This is done by an ISR routine swithing the LEDS between 1.5 and 2 Khz
Project showcase by erkr
This project will show you how to make a unique DIY Christmas Tree for this year’s Christmas.
So, every time a make a project, it ends up looking like a plutonium based device. And this is one of them.
Project showcase by Jose Cabrera
Or connect with your social account:
New here? Create an account