Sending Bytes to an 8x8 LED Matrix.
You’ll learn about IR protocol and how to use the IR receiver module.
Simulate a traffic light using an Arduino and LEDs! This project is super cool to watch and easy to make!
Project tutorial by Zachary Haslam
Pedestrian walk cycle will only occur when both lights are red AND button has been pressed.
Project showcase by FalcomDigital
This is the easiest RGB cube you've ever seen - nothing but an UNO and 125 LEDs!
Project tutorial by Doug Domke
How to make a 7x7x7 LED cube with Arduino.
Project tutorial by Marcazzan_M
Lets build a small cute 5*5 RGB LEDMATRIX
Project tutorial by edison science corner
An animated cube made with 512 RGB LEDs driven by an ATmega328.
Project tutorial by John Bradnam
DIY light based transmission between two Arduinos using LED and LDR with custom communication protocol.
Project tutorial by saadsaif0333
Build a beautiful “infinity mirror” Illusion that you can control by changing this mirrors' orientation. Rotate for changing colors!
Project tutorial by Lucas Ainsworth
Use an Android device to control the color of a NeoPixel via a Bluetooth connection.
Project tutorial by Bryce K and Lucas W
Low-cost outdoor lights with DMX control.
Project tutorial by Sebastian Wiessner
The LEDog collar lights up when it gets dark, helping you locate your dog from far away.
Project showcase by circuito.io team
This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.
Project tutorial by HeathenHacks
Use your Arduino to create a Binary Clock and learn how to read Binary numbers.
Project in progress by Peter Lunk
Made a twist on good old Nanoleaf project with WS2812B RGB LEDs and Attiny85!
Project tutorial by Arnov Sharma
Are you tired of sticking your arms out to indicate which direction you're turning?
Project tutorial by simonwongwong
HexaLeaf Setup made from combining 6 Custom WS2812B PCB together
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Project tutorial by Dmitrii ALBOT
Made a LED tower with 180 LEDs and used Pro Micro in order to control them in sequence.
Driving a dot matrix display with Arduino using data from a Winamp plugin.
Project showcase by raul
Simple device to control and initialize DALI lamps.
Project in progress by NabiyevTR
Arduino based 3D LED Cube (3x3x3) which can produce any light pattern with 27 LEDs.
Project tutorial by Praditha Alwis
Ambient lighting that smartly responds to your moods and needs.
Project tutorial by Daniel Martin
Or connect with your social account:
New here? Create an account