An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is my first Arduino-based, Bluetooth-controlled RC car.
Project in progress by Saman Fernando
Diversity Adaptive Obstacle Avoiding Robot
Project showcase by Team Maverick
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Control an Arduino robot with a smartphone using ESP8266.
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Ahmed Hamdy and Garry Gerwer
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
Or connect with your social account:
New here? Create an account