A simple obstacle avoiding robot with 3D-printed and salvaged parts.
Project tutorial by Arnov Sharma
Vintage 1980s Nikko remote control RC car mascot.
Project tutorial by MarcoGPS
A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.
Project tutorial by AhmedAzouz
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
You can use different appliances. This project will turn the DC motor on or off by clapping.
Project tutorial by
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
It's a BLDC motor based jet turbine.
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
Easy to build instructions for making the new Nematoduino mk2, an Arduino Uno-compatible robotic simulation of the C. elegans nematode.
Project tutorial by Nathan Griffith
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
by Ingo Lohs
LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.
Project tutorial by SurtrTech
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
Project showcase by potentprintables
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Get a grip! This grip arm allows Vorpal the Hexapod to grab items in a claw that opens and closes, the arm also raises and lowers.
Project showcase by vorpalrobotics
Control PWM fans with an Arduino, some basic C# programming and a lot of fun!
Project tutorial by MyName1sSimon
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Or connect with your social account:
New here? Create an account